Toll Converting Posts

Atlapac Corporation is a leading contract manufacturer and distributor of pouches and bags as well as an officially licensed Inno-Lok® converter of pre-zippered films.

Atlapac Corporation, a leading manufacturer of bags, pouches and flexible packaging, has successfully been recertified with SQF Code Edition 8.0, Food Safety Code for Manufacture of Food Packaging. SQF is a HACCP (Hazard Analysis Critical Control Points) based food safety program recognized by GFSI (Global Food Safety Initiative). SQF certification is a food safety standard that is comparable to BRC (British Retail Consortium) and FSSC 22000 (Food Safety System Certification). The SQF certification program ensures that products have passed thorough international standards for food quality and safety. SQF is recognized by retailers and foodservice providers around the world who require a rigorous, credible food safety management system.


“Atlapac’s SQF Code Edition 8.0, Food Safety Code for Manufacture of Food Packaging recertification further demonstrates our commitment to exceed the existing basic food safety and quality expectations. Each step throughout our various processes engages our employees in the food safety culture. This certification reinforces to our customers that we are committed to being a reliable packaging supplier within our various supply chains,” says Paul Unrue, President at Atlapac Corporation.

Atlapac has 30 quality and food safety programs in place, the following are some of the programs: Document Control, Management Audits/ Monthly Audits, Good Manufacturing Practices, Pest Control, Chemical Control, Storage and Handling, Training, Quality Control, Customer Quality/Complaint Management, Traceability, Hold and Release Protocol, Glass and Brittle Plastics, Sanitation and Maintenance. Atlapac is committed to making food safe products for all customers. With food safety as a priority, Atlapac’s customers know there is no risk in using Atlapac products for in-process manufacturing or as a finished consumer package.Atlapac consists of a team of Packaging Professionals. The manufacturing facility in Ohio converts a million packages a day.

Atlapac Corporation is a privately held company that has been pioneering innovative packaging products for 30 years. Contact us at our Columbus, Ohio, manufacturing facility at 800-888-7019 or 614-252-2121; Fax 614-252-7289 or via email at hello@atlapac.com. Visit our web site at www.atlapac.com

Atlapac adding pouch capacity and a new tooling line

In December of 2018, Atlapac Corporation, a leading manufacturer of bags, pouches and flexible packaging, has added another pouch line and in-house tooling. “Atlapac’s new pouch line is 100% American made, and it runs recyclable/environmentally friendly materials. We already run straight COEX LDPE pouches on our flat bottom line here; but now with this new all servo pouch line we will be dramatically increasing our throughput and capacity plant wide”, says Paul Unrue, President at Atlapac Corporation.

In other news, Atlapac has also added a new machine to make all the tooling needed for pouch making in house. “We wanted our clients to be able to get hard tooling made in our building for pouches, Inno-Lok and other applications. We invested in this for our clients, and to help us service them as fast and efficiently as possible”, stated Unrue.

Atlapac has 30 quality and food safety programs in place, the following are some of the programs: Document Control, Management Audits/Monthly Audits, Good Manufacturing Practices, Pest Control, Chemical Control, Storage and Handling, Training, Quality Control, Customer Quality/Complaint Management, Traceability, Hold and Release Protocol, Glass and Brittle Plastics, Sanitation and Maintenance. Atlapac is committed to making food safe products for all customers. With food safety as a priority, Atlapac’s customers know there is no risk in using Atlapac products for in-process manufacturing or as a finished consumer package. Atlapac is a
level 2 certified SQF facility.

Atlapac Corporation is a privately held, family owned company that has been pioneering innovative packaging products for 30 years. Contact us at our Columbus, Ohio, manufacturing facility at 800-888-7019 or 614-252-2121; Fax 614-252-7289 or via email at hello@atlapac.com. Visit our web site at www.atlapac.com.

Atlapac Introduces SC-Zip

Atlapac, an American manufacturer of poly packaging, pouches and bags, introduces SC-Zip, straight cut zipper profile.

There are many benefits to SC-Zip. See the video below.

Atlapac consists of a team of Packaging Professionals. The manufacturing facility in Ohio converts a million packages a day.

Atlapac Corporation is a privately held company that has been pioneering innovative packaging products for over 25 years. Contact us at our Columbus, Ohio, manufacturing facility at 800-888-7019 or 614-252-2121; Fax 614-252-7289 or via email at hello@atlapac.com. Visit our web site at www.atlapac.com

9-7-17 SQF Certified Press Release

Atlapac Corporation, a leading manufacturer of bags, pouches and flexible packaging, has
successfully achieved SQF (Safe Quality Food) Level 2 Certification.
SQF is a HACCP (Hazard Analysis Critical Control Points) based food safety program recognized by GFSI (Global Food Safety Initiative). SQF certification is a food safety standard that is comparable to BRC (British Retail Consortium) and FSSC 22000 (Food Safety System Certification). The SQF
certification program ensures that products have passed thorough international standards for food quality and safety. SQF is recognized by retailers and foodservice providers around the world who require a rigorous, credible food safety management system.
“Atlapac’s SQF Level 2 Certification further demonstrates our commitment to exceed the existing basic food safety and quality expectations. Each step throughout our various processes engages our employees in the food safety culture. This certification reinforces to our customers that we are committed to being a reliable packaging supplier within our various supply chains,” says Paul Unrue, President at Atlapac Corporation.

Atlapac has 30 quality and food safety programs in place, the following are some of the programs: Document Control, Management Audits/ Monthly Audits, Good Manufacturing Practices, Pest Control, Chemical Control, Storage and Handling, Training, Quality Control, Customer Quality/Complaint Management, Traceability, Hold and Release Protocol, Glass and Brittle Plastics, Sanitation and Maintenance. Atlapac is committed to making food safe products for all customers. With food safety as a priority, Atlapac’s customers know there is no risk in using Atlapac products for in-process manufacturing or as a finished consumer package.
Atlapac consists of a team of Packaging Professionals. The manufacturing facility in Ohio converts a million packages a day.
Atlapac Corporation is a privately held company that has been pioneering innovative packaging products for 30 years. Contact us at our Columbus, Ohio, manufacturing facility at 800-888-7019 or 614-252-2121; Fax 614-252-7289 or via email at hello@atlapac.com. Visit our web site at www.atlapac.com

Atlapac Corporation, a manufacturer of premade bags and pouches, announces the addition of a new state of the art flat bottom pouch line.
Atlapac has a new flat bottom pouch line in Columbus, Ohio. We have also added an ultrasonic coffee valve system to the machine. Atlapac will be producing a 100% domestically made coffee pouch, with a true flat bottom. These new packages are completely made in the Midwest United States (Columbus, Ohio). This line can add standard zippers, and the new Pocketzip™ technology. Made right here in Ohio.

Atlapac consists of a team of Packaging Professionals. The manufacturing facility in Ohio converts a million packages a day.

Atlapac Corporation is a privately held company that has been pioneering innovative packaging products for nearly 30 years. Contact us at our Columbus, Ohio, manufacturing facility at 800-888-7019 or 614-252-2121; Fax 614-252-7289 or via email at hello@atlapac.com. Visit our web site at atlapac.com.

Atlapac, an American contract manufacturer of pouches, bags and Inno-lok® preapplied zipper film, is pleased to announce they have additional capacity in their Inno-lok® department.

In 2011 Atlapac added Inno-lok® to their toll converting capabilities in order to service their customers, the printer and laminators in the industry.

With the growing demand for preapplied zipper film Atlapac now has multiple Inno-lok lines to meet your customer’s quick demands.  We offer competitive pricing, speed-to-market and WE DO NOT PRINT OR LAMINATE, you will never compete against Atlapac.  We strictly work with the printer/laminators in the industry as a true extension of your business, a true PARTNER.

Inno-lok® runs on vertical or horizontal form, fill and seal machines which allows for faster production over any other reclosable packaging method.  Inno-lok® requires no additional equipment expense!  Markets or applications include: frozen foods, produce, snacks, nuts & seeds, and pet food, to name a few. Learn more here //www.atlapac.com/toll-converting/inno-lok/

Atlapac consists of a team of Packaging Professionals.  The manufacturing facility in Ohio converts a million packages a day.

Atlapac Corporation is a privately held company that has been pioneering innovative packaging products for over 25 years.  Contact Tammy Lehar, Business Development Manager at 330-906-7324 or via email at tlehar@atlapac.com.  Visit our web site at atlapac.com.

Atlapac, an American contract manufacturer of pouches, bags and

Inno-lok® pre-applied zipper film, announces the arrival of Slide-Rite® Child-Guard™ Child Resistant Slider Zippers (from Presto Products).  The capability was added to meet the growing demands of a much needed child resistant flexible package for products that should not be consumed by children or taken without adult supervision.

Paul Unrue, Vice President, Sales & Marketing, stated “We have been in the developing stages of a stock bag for multiple markets to offer a child safe solution with a pouch. Presto’s Slide-Rite® Child-Guard™ Child Resistant Slider Zipper offers tested performance results, where both the requirements of the Poison Prevention Packaging Act (16 CFR 1700) and the classification from ASTM (D3475) International have been validated by Presto.”

The innovative closure system is easy for users to operate by aligning the slider tongue with the groove, press down lightly on the slider’s top side and pull the slider across the zipper track.  Adult consumers (including seniors), will find the zipper easy to open, but it is extremely challenging for children age five and under as imposed by the Poison Prevention Packaging Act.

Child GuardUnrue also added, “the technology extends the opportunities and markets our partners (the printers and laminators of the flexible packaging industry) can pursue that were previously available only to rigid packaging.”

Markets or applications include: medicinal food products, pharmaceuticals, nutraceuticals, chemical, lawn & garden and household products.

Atlapac consists of a team of Packaging Professionals. With over 50 production lines making millions of packages every day, Atlapac is a food certified, quality focused, and centrally located manufacturer in Columbus, Ohio.

Presto Products Company is a market-leading supplier of products ranging from private label food and disposer bags to packaging closures. Presto, a business of Reynolds Packaging Group, operates six manufacturing plants and supports customers in North America, Europe and Asia. Presto Products Co., (800) 558-3525, prestoproducts.com.

Atlapac Child Guard Converting Capabilities

Atlapac, an American contract manufacturer of pouches, bags and Inno-lok® preapplied zipper film, announces they will add additional capacity to their Inno-lok® department in mid-June.

In 2011 Atlapac added Inno-lok® to their toll converting capabilities in order to service their customers, the printer and laminators in the industry.

Paul Unrue, Vice President, Sales & Marketing, stated, “Since adding Inno-lok® in 2011 we have been amazed at the continued success and growth of this product offering.  Due to that demand we had to add additional capacity.”

Inno-lok® runs on vertical or horizontal form, fill and seal machines which allows for faster production over any other reclosable packaging method.  Inno-lok® requires no additional equipment expense!  Markets or applications include: frozen foods, produce, snacks, nuts & seeds, and pet food, to name a few. Learn more here //www.atlapac.com/toll-converting/inno-lok/

Atlapac consists of a team of Packaging Professionals.  The manufacturing facility in Ohio converts over a million packages a day.

Atlapac Corporation is a privately held company that has been pioneering innovative packaging products for over 25 years.  Contact us at our Columbus, Ohio, manufacturing facility at 800-888-7019 or 614-252-2121; Fax 614-252-7289 or via email at hello@atlapac.com. Visit our web site at atlapac.com

AssetPoint, a leading provider of Computerized Maintenance Management Software / Enterprise Asset Management (CMMS / EAM) solutions, announced today that Atlapac Corporation has selected TabWare CMMS / EAM for asset and maintenance management for their food grade manufacturing site located in Columbus, Ohio.

Atlapac Corporation is a leading contract manufacturer and distributor of custom, pre-made pouches and bags, and is an officially licensed Inno-Lok converter of pre-zippered films. With a focus in quality control, Atlapac provides their customers with the highest quality pouches and the best service in the industry.

In an effort to become more proactive and efficient, Atlapac began searching for an easy to use CMMS / EAM solution that would help automate their maintenance and asset management initiatives. Atlapac needed to minimize unplanned downtime and manufacturing equipment failures, so they wanted a solution that would allow them to better plan, organize and manage all Preventive Maintenance (PM) work. Additionally, Atlapac wanted the ability to compare parts and labor, easily maintain inventory and quickly track equipment history. Atlapac is a food grade facility (certified with the American Institute of Bakers (AIB)), so their packaging must meet all food safety regulations. After evaluating several CMMS / EAM solution providers, Atlapac found that TabWare met all of their functional requirements and would help them ensure product quality and throughput.

Atlapac also needed to get up and running quickly, so they chose the Software as a Service (SaaS) deployment option. AssetPoint passes an annual SSAE 16 Type II audit for system and data security year after year and maintains a formal disaster recovery process to ensure business continuity in the event of a disaster. AssetPoint also upholds an annual overall uptime rate of over 99.97%.

“As our operations continue to grow, we need a solution that would enable us to become more proactive and minimize unplanned equipment downtime. Easily maintaining our inventory and tracking equipment history was also extremely important. TabWare met all of our functional requirements, including a very competitively priced SaaS deployment option, and we are eager to begin planning and scheduling our PM work,” Nick Sarchet, Operations Manager at Atlapac said.

AssetPoint has been a leader in CMMS / EAM solutions for over 30 years, and TabWare, a Best-in-Class CMMS / EAM solution designed by maintenance professionals for maintenance professionals, is utilized by organizations of all sizes and in many industries, such as Oil & Gas, Discrete and Process Manufacturing, Food & Beverage, Chemicals and Mining & Metals. TabWare maximizes asset performance and improves maintenance efficiencies, resulting in reduced operating costs and higher profit margins. TabWare is easy to learn and easy to use, so organizations are able to get up and running in days. AssetPoint offers many flexible licensing options, and customers can choose to deploy TabWare onsite or in a hosted SaaS environment. TabWare is the leading CMMS / EAM solution for organizations that want full functionality without the expense, resources and time other solutions demand.

Mike Levine, AssetPoint CEO, said, “AssetPoint is very pleased that Atlapac Corporation has selected TabWare for their manufacturing plant’s PM work and equipment maintenance requirements. TabWare will ensure that they continue to deliver the highest quality products in the industry, and we are looking forward to partnering with Atlapac for many years to come.”

About Atlapac Corporation:

Atlapac Corporation is a leading contract manufacturer and distributor of pouches and bags, as well as an officially licensed Inno-Lok converter of pre-zippered films. Providing more than 500 clients with their products and services, Atlapac assists in finding the right package to fit the specific needs for their product while helping their clients communicate with uniqueness, clarity and conviction. The company was founded by James Staeck in 1986 with three machines. Today, Atlapac operates over fifty machines producing packaging for local and national accounts, creating customized solutions across a diverse product mix.

 

About AssetPoint:

AssetPoint, makers of TabWare, is the leading provider of CMMS / EAM solutions for companies whose success depends on the performance of their assets. For over 30 years, AssetPoint has led the market in helping customers control their maintenance costs, optimize spare parts inventory, streamline procurement and improve management, command and control.


Designed by maintenance professionals for maintenance professionals, TabWare is easy to learn, easy to use and proven over time to be the most effective product in the market. That’s why tens of thousands of users trust their critical assets to TabWare each and every day. To view online demos and case studies, visit 
www.AssetPoint.com

Factory Video

Atlapac, an American manufacturer of polypropylene bags, pre-made pouches and Inno-Lok pre-applied zipper, gives you an inside look at the best workforce in the industry and the equipment used to produce Packaging Fit For You.

We hope you enjoy the video, we had a lot of fun making it.

Atlapac consists of a team of Packaging Professionals. The manufacturing facility in Columbus, Ohio converts millions of packages every day.

Atlapac Corporation is a privately held company that has been pioneering innovative packaging products for over 25 years.

Contact us at 800-888-7019 or 614-252-2121; Fax 614-252-7289 or via email at hello@atlapac.com.

Factory Photos and Video