Resources and News
Atlapac Corporation is a leading contract manufacturer and distributor of pouches and bags as well as an officially licensed Inno-Lok® converter of pre-zippered films.
August 21, 2009
Atlapac, an American manufacturer of poly packaging, pouches and bags, announces the arrival of a new sustainable line of bags and pouches. These new lines are being marketed as Terraphane™. There are two current Terraphane™ products coming from Atlapac.
Terraphane™ B09 – A single layer of cellulose material that is truly compostable. These Natureflex films are based strongly on renewable resources and are fully certified to the European (EN13432) and American (ASTM D6400) norms for compostable packaging. In addition they have been proven to be suitable for Home Composting and will also biodegrade in a waste-water environment.
The test programs for EN13432 and ASTM D6400 confirm the suitability of a material for composting in an Industrial setting (e.g. via Municipal collection). In an industrial composting situation the conditions can be optimized for rapid biodegradation and a high temperature is reached (typically circa 60ºC)
In many countries, however, consumers actively compost their garden waste at home, either in Compost Bins or Compost Heaps. These processes are more variable, less optimized and the temperature achieved is rarely more than 2 or 3ºC above the ambient temperature. Under such conditions certain compostable materials will not biodegrade sufficiently. Terraphane B09 films however have been tested and approved to the ’OK Compost Home’ standard, which repeats the EN13432 test protocol at ambient temperature. They can therefore be successfully composted in a Home Composting environment and will typically break down in just a few weeks.
Terraphane™ P09 – A laminated stand-up pouch with a degradable zipper and a degradable plastic. Atlapac developed this alternative pouch to offer a stand-up pouch that offers an outer web of cellulose plastic that is water based glued to a inner layer of degradable plastic. Even the zipper has this additive to degrade. P09 will not meet the compostable designation (B09 does), because it will not degrade fast enough to meet the standards required. However, under the proper conditions, P09 will break down eventually (10-18 months).
The plastic layers (and the zipper material) were engaged in several renowned testing laboratories to independently establish the degradability. The tests concluded that the films were degradable under short and long-term aerobic conditions and asserted that they would degrade under anaerobic conditions over a longer period of time. In addition, the tests concluded that the films did not produce any toxic residue harmful to living organisms in land or water.
“Due to the fact that Atlapac can run so many different types of plastic films, a sustainable line made immediate sense here. We wanted to be diligent in communicating the differences between our first two Terraphane™ products”, stated Paul Unrue, CPP and Vice President of Business Development at Atlapac. “The B09 is a single layer of cellulose film is our fully compostable choice, and the P09 is different because we can offer a stand-up pouch that will degrade”. “One (B09) goes away in a compost bin quickly and the other (P09) eventually goes away”, added Mr. Unrue.
Atlapac consists of a team of Packaging Professionals. The manufacturing facility in Ohio runs millions of bags every month on over 70 machines.
Atlapac Corporation is a privately held company that has been pioneering innovative packaging products for over 25 years. Contact us at our Columbus, Ohio, manufacturing facility: 800-888-7019; 614-252-2121; FAX 614-252-7289 or by email at email@example.com Visit our web site at www.terraphane.com
November 21, 2008
Atlapac, an American manufacturer of poly packaging, pouches and bags, announces the arrival of a new Totani high speed pouch machine. This machine was purchased by Atlapac due to the overwhelming demand for stand-up pouches. The new Totani pouch machine utilizes 4-servo drives, which will enable Atlapac to increase pre-made capacity by up to 40%. This new machine will assist Atlapac to service its converting client base for the flexible packaging industry.
Totani’s unique (4) “servo motor control system” provides high speed stand-up or flat pouch making at speeds of 200 ppm, producing exceptional looking high strength seals. Totani’s original “Water Cooled” zipper sealing plate, supplied as standard equipment, provides an exceptional looking high quality zipper seal.
Stuart Staeck, President of Atlapac stated that they “have been converting pouches for about 10 years. Our recent choice of Totani’s CT series pouch machine was a rather simple one. Not only were we looking to add capacity with an additional production line, we also wanted high speed without sacrificing quality. Totani delivered”, added Mr. Staeck. He also mentioned that “this extremely robust piece of equipment will provide us with years of loyal service….. it just can’t get here fast enough!”
Atlapac consists of a team of Packaging Professionals. The manufacturing facility in Ohio runs literally millions of bags every month.
Atlapac Corporation is a privately held company that has been pioneering innovative packaging products for over 25 years. Contact us at our Columbus, Ohio, manufacturing facility: 800-888-7019; 614-252-2121; FAX 614-252-7289 or by email at firstname.lastname@example.org Visit our web site at www.atlapaccorp.com